Here we have a in house design for all 6BT 6.7 2007.5 and up Cummins owners. Less than 30 minute install without removing the valve cover!! This is the only kit on the market available that will direct bolt on and retain all factory sensors and lines! This will work with all stock VGT engines!!If you have an EGR / VGT delete see our other kits for 5.9 common rail that. Will work without the EPS. This is a less expensive option. Our water bypass kit with our proprietary control valve relieves excessive pressure in the back of the engine while also dropping coolant temperatures by as much as 20 degrees!
Engines that turn high RPM's create high pressure in the back of the block that causes freeze plugs in the block & cylinder head to blow out under'higher than stock' hp applications as well as possible cylinder head gasket damage. This is a common problem with all Cummins engines that are turned up and this is the best solution. This kit will also help with the higher temperature at the back of the engine where #5 & 6 cylinders suffer. Most commonly, people confuse poor flow to the back of the head with excessive heat.
99% of the time it is an issue with temperature and not air flow. We have tested this kit on many of our own and customer trucks for several years and this is a proven must have!!!!
100% made in the U. Shell cast thermostat housing with -8an fitting. 8AN Braided black hose and fittings installed on both ends. Our in house control water bypass valve.
The item "2007 present Cummins Turbo Diesel 6.7L cooling system water bypass kit" is in sale since Monday, July 31, 2017. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Cooling Systems\Other".
The seller is "action*" and is located in Stuart, Florida. This item can be shipped worldwide.