Water Cooling Kit

New Thermaltake Pacific Rl360 Pc Water-cooling Kit Pacific W1 Cpu Water Block

New Thermaltake Pacific Rl360 Pc Water-cooling Kit Pacific W1 Cpu Water Block
New Thermaltake Pacific Rl360 Pc Water-cooling Kit Pacific W1 Cpu Water Block
New Thermaltake Pacific Rl360 Pc Water-cooling Kit Pacific W1 Cpu Water Block
New Thermaltake Pacific Rl360 Pc Water-cooling Kit Pacific W1 Cpu Water Block
New Thermaltake Pacific Rl360 Pc Water-cooling Kit Pacific W1 Cpu Water Block
New Thermaltake Pacific Rl360 Pc Water-cooling Kit Pacific W1 Cpu Water Block
New Thermaltake Pacific Rl360 Pc Water-cooling Kit Pacific W1 Cpu Water Block
New Thermaltake Pacific Rl360 Pc Water-cooling Kit Pacific W1 Cpu Water Block
New Thermaltake Pacific Rl360 Pc Water-cooling Kit Pacific W1 Cpu Water Block

New Thermaltake Pacific Rl360 Pc Water-cooling Kit Pacific W1 Cpu Water Block
NEW THERMALTAKE PACIFIC RL360 PC WATER-COOLING KIT PACIFIC W1 CPU WATER BLOCK. THIS IS A GENUINE ITEM MANUFACTURED BY THERMALTAKE. Pacific W1 CPU Water Block. 3 x Riing 12 RGB LED Fans. 6 x Pacific Compression Fittings.

Set up your own custom water-cooling loop with the Pacific RL360 PC Water-Cooling Kit from Thermaltake. This kit includes everything you need to start liquid cooling your CPU such as: a CPU block, a pump and reservoir combo, a radiator, fans, compressing fittings, tubing, and coolant. You can even add additional components to your loop like RAM, motherboard chipsets, SSDs, as well as graphics cards, as long as you have the respective water-cooling blocks.

If you choose to do so, you may need an extra radiator to offset the heat output from your components. Please note that water-cooling assembly requires some technical know-how.

Improper setup can cause leaks and permanent damage to your system. The Pacific W1 CPU water block is constructed with a copper base and anti-corrosive nickel plating. It has a micro-channel structure with 0.15 mm spacing for optimal clearance and optimized heat dissipation. Furthermore, it's compatible with all modern CPU sockets. The Pacific PR22-D5 is a 300 ml reservoir and D5 pump combo that provides you with a combination of proper water cooling circulation and capacity. It has two pre-drilled G 1/4 ports for filling and a 6mm acrylic pipe that can sustain a maximum pressure of 99 PSI (pounds per square inch). The pump has a manual speed knob that allows it to operate at 1800, 2550, 3300, 4050, or 4800 rpm. Riing 12 RGB LED Fans. Three Riing 12 RGB LED fans with high static pressure are used to cool the radiator. High static pressure fans can push more air through restricted spaces such as thickly stacked radiator fins. A smart fan controller is included so you can adjust the speed for a balance between noise and cooling.

Its hydraulic bearings allow it to run silently and the anti-vibration mounting system eliminates any excess noise. The Pacific RL360 radiator is a 360mm radiator designed to hold three 120mm fans.

It has a high-density fin design with 14 fins per inch (FPI) to maximize heat dispatch for efficient cooling. With dual-row tubes, water flows from one side until it reaches the end and then circulates back to the same side. Furthermore, its G 1/4 threads ensure compatibility with the rest of the items in this kit.

Thermaltake C1000 Opaque Coolant Blue. Used as a heat transfer medium, this coolant is anti-corrosive, anti-freezing, anti-rusting, and biodegradable.

Its opaque properties allow the color to really pop for a vivid water cooling setup. These fittings have a 1/2" inner diameter and a 3/4" outer diameter, allowing proper connection to G 1/4 ports.

It secures the cooling components and provides an even seal around the tubing to prevent leaks. Manufactured from medical grade PVC material, the clear V-Tubler resists twisting and collapse, allowing for tighter bends without kinking, which can cause cooling failures. Designed for use with 1/2 barbs and compression fittings, it gives users better mounting, easier fitting, and ideal flow.

Thermaltake Pacific RL360 PC Water-Cooling Kit. Dimensions (H x W x L).

2.36 x 2.13 x 0.63 (60 x 54 x 16 mm). 12.17 oz (345 g).

1800 / 2550 / 3300 / 4050 / 4800 rpm. Dimensions (L x W x H). 3.7 x 3.44 x 12.19 (94.1 x 87.4 x 309.7 mm). 0.57 - 2.01 mm-H2O. 22.14 - 40.6 CFM. 18.5 - 26.4 dBA. 40,000 hours at 25°F / -4°C. 120 x 120 x 25 mm. 5.68 oz (161.1 g). 15.85 x 5.08 x 2.52 (402.5 x 129 x 64 mm). 34.29 oz (972 g).

0.98 x 0.98 x 0.87 (25 x 25 x 24.7 mm). 1.87 oz (53 g).

17.1 x 12.3 x 10.2. The item "NEW THERMALTAKE PACIFIC RL360 PC WATER-COOLING KIT PACIFIC W1 CPU WATER BLOCK" is in sale since Tuesday, November 28, 2017. This item is in the category "Computers/Tablets & Networking\Computer Components & Parts\Fans, Heat Sinks & Cooling\CPU Fans & Heat Sinks". The seller is "5star*products-premium*deals" and is located in Melbourne. This item can be shipped worldwide.

  • Brand: Thermaltake
  • MPN: BH-THW113C12SWA
  • Type: Fan

New Thermaltake Pacific Rl360 Pc Water-cooling Kit Pacific W1 Cpu Water Block